Most Tacoma homes land somewhere between $1,100 and $2,200 for a full seamless aluminum gutter replacement. That is third-party data, not a sales pitch: Homeblue puts seamless aluminum installation in Tacoma at $6.40 to $11.10 per linear foot, and a typical single-family home here carries 150 to 200 linear feet of gutter. Two-story access, 6-inch gutters, extra downspouts, rotted fascia, or gutter guards push that higher, sometimes past $4,000. Here is exactly what moves the number, and why two quotes on the same house can differ by $1,200.
Where Those Numbers Come From
No gutter company in this market publishes pricing, which is why searching “gutter installation cost Tacoma” sends you straight to a national lead-gen site. So let’s start with the public data.
Homeblue’s Tacoma figures put gutter installation at $5.30 to $11.70 per linear foot across all materials, narrowing to $6.40 to $11.10 for seamless aluminum. That works out to about $640 to $1,110 at 100 feet and $1,270 to $2,230 at 200 feet. Angi’s Seattle guide lands in the same neighborhood: $691 to $1,757 per project, averaging $1,223, with labor at $50 to $100 per hour.
Those ranges are wide on purpose. A rancher in South Tacoma and a two-story craftsman on North Slope aren’t the same job, even in identical materials. Here’s what separates them.
The Seven Things That Move Your Number
1. Linear Feet of Roofline
This is the base multiplier, and it isn’t the same as square footage. A compact two-story can have less gutter than a sprawling rambler with multiple roof planes, dormers, and a covered porch. Every extra roof plane adds an end cap, a corner, and often another downspout. Measure the roofline, not the house.
2. One Story vs. Two Story
Height is the biggest labor variable. Ground-level ladder work moves fast; second-story work means staging, longer setups, and a slower pace. At Angi’s $50 to $100 per hour, that time lands straight in your total. Add mature firs, tight side yards, or a hillside lot and access alone can shift a quote by several hundred dollars.
3. 5-inch vs. 6-inch gutter
Six-inch K-style holds roughly 40 percent more water than 5-inch and pairs with larger 3×4 downspouts. It costs more per foot, and in Tacoma’s kind of sustained winter rain it’s frequently the right call rather than an upsell, especially on steep roofs, large roof planes, or homes with a history of overflowing corners. Our 5-inch vs. 6-inch breakdown covers when the upsize is worth it.
4. Downspout Count, Size, and Where the Water Goes
This is where most quote-to-quote differences hide. Angi notes that moving from 2×3 to 3×4 downspouts raises cost while smaller ones lower it. A house needing seven downspouts costs meaningfully more than the same house quoted with four. The four-downspout version is also the one that overflows in November. Underground drainage away from the foundation is a separate line item again.
5. Fascia and Wood Repair
The most common surprise on a Pacific Northwest gutter job. Gutters that have been overflowing for years often hide soft, rotted fascia underneath, and new gutters can’t hang on wood that won’t hold a screw. Both Homeblue and Angi flag eave and fascia condition as a cost driver. A good contractor checks the fascia by hand before quoting; a cheap quote often just doesn’t look. See fascia board repair.
6. Tear-off and Haul-Away
Removing and disposing of your existing gutters is real labor and a real dump fee. Some quotes include it. Some quietly don’t. This one line item explains a surprising share of the gap between two bids on the same house.
7. Gutter Guards
Guards are priced separately, and they’re not a small add. Homeblue puts guard installation in Tacoma at $3.50 to $9.50 per linear foot, or roughly $610 to $1,660 on a 175-foot home, on top of the gutter. Under Douglas fir and big-leaf maple, plenty of Tacoma homeowners decide that math works. Others put the money toward a 6-inch gutter and clean twice a year. Both are defensible.
Seamless Gutter Cost in Tacoma, WA, By Material
Here is gutter replacement cost per linear foot by material, with what each works out to on a 175-foot home:
| Material | Installed cost per linear foot | On a 175-ft home | Notes |
| Vinyl | $4.20 – $7.40 (Homeblue, Tacoma) | $735 – $1,295 | Cheapest up front; sectional, not seamless, so more joints to leak |
| Seamless aluminum | $6.40 – $11.10 (Homeblue, Tacoma)$4 – $7 (Angi, Seattle) | $1,120 – $1,943 | The Tacoma default: rolled on site to one continuous length per run |
| Galvanized steel | $8 – $9 (Angi, Seattle) | $1,400 – $1,575 | Stronger under ladder and limb impact; can rust at cut ends over time |
| Copper | $25 – $30 (Angi, Seattle) | $4,375 – $5,250 | Historic and high-end homes; patinas, lasts decades |
| Gutter guards (add-on) | $3.50 – $9.50 (Homeblue, Tacoma) | $610 – $1,660 | Quoted on top of gutter, not instead of it |
One more line that belongs in your budget: sales tax. Washington applies retail sales tax to labor as well as materials on work like this, and Tacoma’s combined rate is currently 10.5 percent, or about $189 on an $1,800 job. Rates vary by address across Pierce County, so confirm yours rather than assuming.
Why two quotes on the same house differ by $1,200
This is the part no cost calculator will tell you. When two contractors walk the same roofline and come back $1,200 apart, it’s almost never because one of them is greedy. It’s because they quoted two different jobs.
- Tear-off and haul-away. One priced removal and disposal of the old gutter. One assumed you’d handle it, or planned to add it later.
- Gutter size. A 5-inch quote and a 6-inch quote aren’t comparable. Neither are 2×3 and 3×4 downspouts.
- Downspout count. Four versus seven changes material, labor, and whether the system keeps up in a Puget Sound downpour.
- Fascia left as “TBD.” If rotted wood isn’t priced, it isn’t gone. It becomes a change order after the old gutter comes down.
- Thickness and hanger spec. A .032 gutter on hidden hangers every 24 inches costs more than .027 on spikes every 36 inches. It also stays straight in year four.
- Tax and disposal. In the total for one bidder, added at the end by the other.
The cheapest quote is very often the one missing the most scope. To compare bids honestly, ask every contractor for the same six things in writing: total linear feet, gutter size, downspout count and size, hanger type and spacing, whether tear-off and fascia repair are included, and whether sales tax is in the number shown. Once those match, a price difference is real information.
What about gutter cleaning?
Cleaning is a different budget entirely. Homeblue puts gutter cleaning in Tacoma at $0.60 to $1.10 per linear foot, or roughly $70 to $240 for a typical home: about $70 to $170 single story and $90 to $190 two story. In practice, published local minimums often start above those averages, and homes under heavy fir and maple cover need two visits a year, not one. Scope details are on our gutter cleaning page.
How we quote it
We won’t publish a flat price for your house, because a flat price for your house doesn’t exist until someone has looked at it. What we will do: measure the roofline, place downspouts based on where the water actually goes, put hands on the fascia before promising anything, and give you a written scope you could hold the next contractor to, with tear-off, guards, and tax broken out as their own lines instead of blended into one number.
If something we find changes the price, you hear it before we start, not after. See our gutter installation service, or request a free quote and we’ll come measure.
Frequently Asked Questions
How Much Do New Gutters Cost in Tacoma?
Most Tacoma homes run roughly $1,100 to $2,200 for a full seamless aluminum replacement, based on Homeblue’s Tacoma figure of $6.40 to $11.10 per linear foot and a typical 150 to 200 feet of roofline. Two-story access, 6-inch gutter, extra downspouts, fascia repair, or guards push it higher.
What is the Gutter Replacement Cost per Linear Foot?
Third-party data puts installed gutter in Tacoma at $5.30 to $11.70 per linear foot across all materials: about $4.20 to $7.40 for vinyl, $6.40 to $11.10 for seamless aluminum, $8 to $9 for galvanized steel, and $25 to $30 for copper. Guards add $3.50 to $9.50 per foot.
Is a 6-inch Gutter Worth the Extra Cost in Tacoma?
Often, yes. Six-inch K-style carries roughly 40 percent more water than 5-inch and pairs with larger 3×4 downspouts, which matters in Tacoma’s sustained winter rain. It’s most worth it on steep roofs, large roof planes, and homes that already overflow at the corners.
How Much Does Gutter Cleaning Cost in Tacoma?
Homeblue puts gutter cleaning in Tacoma at $0.60 to $1.10 per linear foot, or about $70 to $240 total, roughly $70 to $170 single story and $90 to $190 two story. Local minimums often start higher, and homes under heavy fir usually need two visits a year.