Gutter Installation, Cleaning & Repair in Midland, WA

Walk it before deciding. Aluminum gutters from the sixties and seventies often have sound metal with failed hangers, dead sealant at the corners and a pitch that has drifted flat. That is a repair. If the runs are rusted through, leak at every seam or are undersized for the roof, seamless replacement is the better money. We show you which and quote only that.

Twice a year for most homes: late autumn after the maple drops and spring after storm season. Houses under the fir and cedar along Swan Creek Park or backing onto a wooded lot fill faster, because needles fall all year, and usually want a third visit or fine mesh to keep the outlets clear.

The run has lost its pitch. Long single-story eaves sag between hangers over the years, so water pools at the low spot instead of reaching the downspout. Standing water breeds moss and rots the fascia behind it. Re-hanging the run with new hangers and a correct fall to the outlet fixes it, no replacement needed.

Just a cleaning is fine, and for most Midland homes it is the right call. We clean the trough by hand, flush the downspouts, clear moss and tell you if we saw anything that needs attention. No pitch, no pressure. If you want it handled every year, we put you on a schedule and you stop thinking about it.

Coarse screens and foam inserts do not. Needles drop through the openings or mat on top and dam the water. Fine mesh has openings smaller than a needle, so the needles dry on top and blow off while the trough stays clear. That is why BroGuard is fine mesh. You still want a quick look each autumn, but not from a ladder.